#Videohub download how to
#Videohub download install
#Videohub download password

Such as 'Main Output' for your broadcast out, or 'MovieRecorder Source' if this sets what signal is sent to a MovieRecorder. Set it to something that will mean something for the user. Set the Label : This is the name that will be shown either in OnTheAir Live or OnTheAir Node.By default, the first output is added, with the first input as source. Click on the + icon at the bottom of the list to add an output.Then you will have to add each output you want to control (so users can only modify the ones they need).

If you still can not see it, contact your system administrator or your Blackmagic-Design representative.Ĭonfigure the different outputs and inputs.

If the Videohub does not show up in the Bonjour devices, you can try to reboot your Videohub as we have seen that from time to time, the Bonjour Service of the Videohub does not work anymore and a simple reboot fixes the issue.

When you start it, leave it a few seconds to scan your network and the videohub should show up in the list as shown in the screenshot below: To check if your Videohub is listed in the Bonjour services, you can download a small utility application called ' Bonjour Browser'. And Bonjour only works in the same subnet. OnTheAir Node finds any available Videohub through ' Bonjour'.

Check that your computer is in the same local network (Subnet) as the Videohub.

If you do not see your Blackmagic Videohub in the list: If you have a Videohub available in the local network, you'll be able to select it from the 'Selected Videohub' drop-down menu.

In the Plug-In drop down list, select ' Blackmagic Videohub'.

#Videohub download password

Click on the 'Unlock' icon at the bottom, to allow the modification of settings, and enter a computer admin password.Open the OnTheAir Node system preference pane,.This means that each output Node can have its own settings. Once installed, you need to configure the plugin for each Node in the 'Plug-Ins' tab. Note: in the example below, we are showing the configuration for the Blackmagic Videohub. The behaviour and setup will be the same with the AJA KUMO. But it is worth checking with a demo version of OnTheAir Node to make sure that your specific model and configuration will work. OnTheAir Node should be able to control all models of Kumo or Videohub that are connected to a local computer in USB or in Ethernet.

#Videohub download install

You do not need to install anything else, nor to purchase an option. The plugin for the AJA Kumo and Blackmagic Videohub are bundled in the installer of OnTheAir Node. In OnTheAir Node, there are 'plugins' that allow you to control external devices such as GPICommander or OnTheAir CG, or video routers.

#Videohub download how to

This article explains how to control the Videohub or AJA Kumo, for other routers controls, check here.

if you use a different router, the control will be done through the application OnTheAir Switch (license required).

This will be the case with the AJA Kumo and Blackmagic Videohub.

directly through a plugin in OnTheAir Node.

OnTheAir Node can control most video routers.